Ana içeriğe geç

Logitech Extreme 3D Pro Joystick Trigger Replacement

Neye ihtiyacın var

  1. Logitech Extreme 3D Pro Joystick Trigger  Replacement, Disassembly of the handle: adım 1, 1 resimden 1.
    • Remove these three Phillips #1 screws:

    • Two 10mm screws.

    • One 7mm screw.

  2. Logitech Extreme 3D Pro Joystick Trigger  Replacement: adım 2, 1 resimden 1.
    • Using your fingers, lower the rubber boot to reveal two screws underneath the joystick.

    • Remove the two 10mm Phillips #1 screws.

  3. Logitech Extreme 3D Pro Joystick Trigger  Replacement: adım 3, 2 resimden 1. Logitech Extreme 3D Pro Joystick Trigger  Replacement: adım 3, 2 resimden 2.
    • Pull apart the joystick chassis by hand.

    • Release this clip located underneath the hand rest

    • The circuit board will be loose and may fall down.

  4. Logitech Extreme 3D Pro Joystick Trigger  Replacement, Joystick Trigger: adım 4, 1 resimden 1.
    • Remove the plastic trigger from the joystick.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Emanuel Canela

Üyelik tarihi: 01/25/18

1.297 İtibar

7 adet Kılavuz yazıldı

Ekip

USF Tampa, Team S7-G1, Passmore Spring 2018 USF Tampa, Team S7-G1, Passmore Spring 2018 üyesi

USFT-PASSMORE-S18S7G1

4 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 12

Her zaman: 1,399