Eşyalarını Tamir Et Topluluk Mağaza

Bu kılavuzda güncel değişiklikler var. En son onaylanmamış sürüme geçin.

Logitech G700s Scroll Wheel Replacement

Giriş

This guide will help assist replacing the scroll wheel in you Logitech G700s.

Neye ihtiyacın var

  1. Logitech G700s Scroll Wheel Replacement, Top Case Replacement: adım 1, 1 resimden 1.

    • Remove the batteries from the mouse.

    • Use a plastic opening tool to peel up the four mouse feet.

    Düzenle

  2. Logitech G700s Scroll Wheel Replacement: adım 2, 2 resimden 1. Logitech G700s Scroll Wheel Replacement: adım 2, 2 resimden 2.

    • Remove the five 5.5mm Phillips #00 screws found underneath the mouse feet.

    Düzenle

  4. Logitech G700s Scroll Wheel Replacement: adım 3, 3 resimden 1. Logitech G700s Scroll Wheel Replacement: adım 3, 3 resimden 2. Logitech G700s Scroll Wheel Replacement: adım 3, 3 resimden 3.

    • Pull the top of the mouse off of the bottom half.

    • There's a wire connecting the two halves.

    • Unplug the programmable buttons from the motherboard.

    • The white pin housing on the motherboard may come off while unplugging. In that case, use tool to pry between at location indicated to separate them and insert the housing back onto the motherboard.

    Düzenle

  5. Logitech G700s Scroll Wheel Replacement, Scroll Wheel: adım 4, 1 resimden 1.

    • Remove the black pin that holds the scroll wheel to the motherboard.

    Düzenle

  6. Logitech G700s Scroll Wheel Replacement: adım 5, 2 resimden 1. Logitech G700s Scroll Wheel Replacement: adım 5, 2 resimden 2.

    • Lift the scroll wheel straight up off the motherboard.

    • Be careful not to lose the two small springs! They are magnetic and could attach to any magnetic tip screw driver!

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

3 farklı kişi bu kılavuzu tamamladı.

Yazar

4 tane daha katılımcı ile

Chase Tisinger

Üyelik tarihi: 02/14/18

687 İtibar

5 adet Kılavuz yazıldı

Rozetler: 11

+8 tane daha rozet

Ekip

USF Tampa, Team S2-G3, Nance Spring 2018 USF Tampa, Team S2-G3, Nance Spring 2018 üyesi

USFT-NANCE-S18S2G3

4 Üyeler

15 adet Kılavuz yazıldı

Bir Yorum

Very good guide! The replacement scroll wheel I got on eBay did not have the black plastic part that sits on top, so I had to remove it from the original one. I did that by pulling the clear plastic part away slightly and removing it (do one side first and then the other side).

Ash - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 18

Son 30 gün: 60

Her zaman: 5,964