Eşyalarını Tamir Et Topluluk Mağaza

Logitech Harmony 900 Motherboard Replacement

Neye ihtiyacın var

  1. Logitech Harmony 900 Motherboard Replacement, Battery: adım 1, 2 resimden 1. Logitech Harmony 900 Motherboard Replacement, Battery: adım 1, 2 resimden 2.

    • Press the oval shaped button on the lower back of the remote to release the battery cover.

    • While pressing the button, remove the cover.

    Düzenle

  2. Logitech Harmony 900 Motherboard Replacement: adım 2, 2 resimden 1. Logitech Harmony 900 Motherboard Replacement: adım 2, 2 resimden 2.

    • Push the battery in, pull it up, and slide it out.

    Düzenle

  3. Logitech Harmony 900 Motherboard Replacement, Motherboard: adım 3, 1 resimden 1.

    • Using tweezers, peel off the sticker located under the battery cover to reveal two screws.

    Düzenle

  4. Logitech Harmony 900 Motherboard Replacement: adım 4, 2 resimden 1. Logitech Harmony 900 Motherboard Replacement: adım 4, 2 resimden 2.

    • Locate and unscrew the four 50mm screws using the Philips #0 screwdriver.

    Düzenle

  6. Logitech Harmony 900 Motherboard Replacement: adım 5, 1 resimden 1.

    • Use a credit card to pry the black, plastic, back cover off of the device.

    • You may need to get the process started with a metal prying tool before you start using the credit card.

    Düzenle

  7. Logitech Harmony 900 Motherboard Replacement: adım 6, 2 resimden 1. Logitech Harmony 900 Motherboard Replacement: adım 6, 2 resimden 2.

    • Locate the three 50mm screws on the back of the remote and remove them using the Phillips #0 screwdriver.

    Düzenle

  8. Logitech Harmony 900 Motherboard Replacement: adım 7, 2 resimden 1. Logitech Harmony 900 Motherboard Replacement: adım 7, 2 resimden 2.

    • Pry the black, front face of the remote from the back silver part by inserting a credit card in between and sliding down.

    • Again, you may need to use a metal prying tool to get the separation started.

    Düzenle

  9. Logitech Harmony 900 Motherboard Replacement: adım 8, 2 resimden 1. Logitech Harmony 900 Motherboard Replacement: adım 8, 2 resimden 2.

    • When you look at the circuit board, you should see a ribbon attaching the board to the plastic casing.

    • A little lever is holding the ribbon in place. Lift the lever with your nail or a 2.5mm flat-head screwdriver. Move the ribbon away from the circuit board.

    Düzenle

  10. Logitech Harmony 900 Motherboard Replacement: adım 9, 2 resimden 1. Logitech Harmony 900 Motherboard Replacement: adım 9, 2 resimden 2.

    • Using the Philips #0 screwdriver, remove the three 50mm screws from the circuit board.

    Düzenle

  11. Logitech Harmony 900 Motherboard Replacement: adım 10, 1 resimden 1.

    • Using your hands, carefully separate the motherboard from the rest of the remote.

    Düzenle
Sonuç

To reassemble, follow the steps in reverse order.

Yazar

3 tane daha katılımcı ile

John Adams

Üyelik tarihi: 09/25/17

116 İtibar

1 Kılavuz yazıldı

Rozetler: 5

+2 tane daha rozet

Ekip

USF Tampa, Team S4-G5, Eyestone Fall 2017 USF Tampa, Team S4-G5, Eyestone Fall 2017 üyesi

USFT-EYESTONE-F17S4G5

4 Üyeler

4 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 6

Her zaman: 560