Eşyalarını Tamir Et Topluluk Mağaza

Logitech Pure-Fi Anywhere 2 Dock Adapter Cover Replacement

Neye ihtiyacın var

  1. Logitech Pure-Fi Anywhere 2 Dock Adapter Cover Replacement, Dock Adapter Cover: adım 1, 3 resimden 1. Logitech Pure-Fi Anywhere 2 Dock Adapter Cover Replacement, Dock Adapter Cover: adım 1, 3 resimden 2. Logitech Pure-Fi Anywhere 2 Dock Adapter Cover Replacement, Dock Adapter Cover: adım 1, 3 resimden 3.

    • To remove the plastic cover, use the plastic opening tool at the corner of the device.

    • Then insert the metal spudger in the opening and slowly move the metal spudger along all sides of the cover.

    • Caution: Metal spudger can damage the internal components of the device such as the motherboard. Make sure to use the metal spudger carefully to avoid any unnecessary damages.

    • Make sure the metal supdger is inserted deep enough as the cover is glued to the device.

    • Caution: Carefully remove the cover as it is easy to break.

    Düzenle

  2. Logitech Pure-Fi Anywhere 2 Dock Adapter Cover Replacement: adım 2, 2 resimden 1. Logitech Pure-Fi Anywhere 2 Dock Adapter Cover Replacement: adım 2, 2 resimden 2.

    • Remove the eight 10.5 mm Phillips #1 screws securing the cover.

    • Remove three 5.2 mm Philips #1 screws securing the dock.

    Düzenle

  4. Logitech Pure-Fi Anywhere 2 Dock Adapter Cover Replacement: adım 3, 2 resimden 1. Logitech Pure-Fi Anywhere 2 Dock Adapter Cover Replacement: adım 3, 2 resimden 2.

    • Use the metal spudger to loosen the front cover to get into the inner part of the device.

    • Metal spudger can damage the internal components of the device such as the motherboard. Make sure to use the metal spudger carefully to avoid any unnecessary damages.

    • Make sure to carefully lift up the front cover from the back cover.

    • There are wires connecting to between battery and the cover.

    Düzenle

  5. Logitech Pure-Fi Anywhere 2 Dock Adapter Cover Replacement: adım 4, 2 resimden 1. Logitech Pure-Fi Anywhere 2 Dock Adapter Cover Replacement: adım 4, 2 resimden 2.

    • Identify the small circuit board attached to the dock adapter cover.

    • remove two 2.5 mm Phillips #1 screws at the circuit board.

    Düzenle

  6. Logitech Pure-Fi Anywhere 2 Dock Adapter Cover Replacement: adım 5, 2 resimden 1. Logitech Pure-Fi Anywhere 2 Dock Adapter Cover Replacement: adım 5, 2 resimden 2.

    • Carefully take out the dock adapter cover from the device.

    • It might needs few try to pull out the small circuit board.

    • Take out the broken dock adapter cover and replace with the new one.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

3 tane daha katılımcı ile

ali alhashim

Üyelik tarihi: 07/18/18

121 İtibar

1 Kılavuz yazıldı

Rozetler: 2

Ekip

IUPUI, Team S4-G4, Wilson Summer 2018 IUPUI, Team S4-G4, Wilson Summer 2018 üyesi

IUPUI-WILSON-SU18S4G4

4 Üyeler

2 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 8

Her zaman: 814