Neye ihtiyacın var
-
-
Turn the device over. The D-ring will be on the left face of the speaker when viewing the device from this orientation.
-
-
-
Holding the speaker upright, wedge the metal spudger in between the casing and the speaker. Gently pry open the tabs as they are easily broken.
-
-
-
-
With a metal spudger, pry open the tabs on the speaker sleeve along the length of the speaker.
-
-
-
Remove the speaker by pulling it from the terminal as marked in the picture.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
İptal et: Bu kılavuzu tamamlamadım.
7 farklı kişi bu kılavuzu tamamladı.
2Kılavuz Yorumları
Is there anywhere I can buy the motherboard to replace my UE Boom board fried by lightning?