Ana içeriğe geç

Lorex LW2742 Lens Replacement

Neye ihtiyacın var

  1. Lorex LW2742 Lens Replacement, Lens: adım 1, 2 resimden 1. Lorex LW2742 Lens Replacement, Lens: adım 1, 2 resimden 2.
    • Remove the six 10mm Torx T10 screws on the camera face.

  2. Lorex LW2742 Lens Replacement: adım 2, 1 resimden 1.
    • Remove the exterior lens cover.

  3. Lorex LW2742 Lens Replacement: adım 3, 3 resimden 1. Lorex LW2742 Lens Replacement: adım 3, 3 resimden 2. Lorex LW2742 Lens Replacement: adım 3, 3 resimden 3.
    • Remove the foam ring around the lens with tweezers.

    • Be aware, the electronic components of the LED board may be compromised if you use your fingers instead of tweezers for this step.

  4. Lorex LW2742 Lens Replacement: adım 4, 1 resimden 1.
    • Remove the two 5mm Phillips #1 screws.

    • Remove the two 8mm Phillips #0 screws.

    • When reassembling, tighten the top and bottom 5mm screws first, followed by the left and right 8mm screws.

  5. Lorex LW2742 Lens Replacement: adım 5, 1 resimden 1.
    • Remove the LED board with tweezers.

    • It is unnecessary to unplug the LED board from internal components for lens replacement.

  6. Lorex LW2742 Lens Replacement: adım 6, 2 resimden 1. Lorex LW2742 Lens Replacement: adım 6, 2 resimden 2.
    • Use the Phillips #000 to remove the three 3mm screws on the face of the camera lens

  7. Lorex LW2742 Lens Replacement: adım 7, 1 resimden 1.
    • Remove the camera lens.

    • After replacing camera lens and before reassembly it is encouraged to clean new lens surface with a microfiber lens cleaning cloth

Sonuç

To reassemble your device, follow these instructions in reverse order.

Alex Kusmierz

Üyelik tarihi: 09/26/16

601 İtibar

5 adet Kılavuz yazıldı

Ekip

USF Tampa, Team 16-1, Eyestone Fall 2016 USF Tampa, Team 16-1, Eyestone Fall 2016 üyesi

USFT-EYESTONE-F16S16G1

4 Üyeler

12 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 7

Her zaman: 892