Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

Giriş

This guide shows how to remove the battery cover and battery of this device. It shows the location of the screw and where to insert the spudger.

  1. Remove the 5.0mm screw using the Phillips #0 head screwdriver.
    • Remove the 5.0mm screw using the Phillips #0 head screwdriver.

  2. Insert metal spudger as shown in the picture. Move spudger along  to the other side until both snaps come loose.
    • Insert metal spudger as shown in the picture. Move spudger along to the other side until both snaps come loose.

  3. Nintendo Switch Setleri

    A quick fix to get back in the game

    Shop Switch Kits

    Nintendo Switch Setleri

    A quick fix to get back in the game

    Shop Switch Kits
  4. Picture shows the removed battery cover.
    • Picture shows the removed battery cover.

  5. Slide the battery out by pulling on one of two plastics tabs.
    • Slide the battery out by pulling on one of two plastics tabs.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Yancey Crase

Üyelik tarihi: 26-03-2018

217 İtibar

2 adet Kılavuz yazıldı

Takım

IUPUI, Team S1-G4, Harley Spring 2018 IUPUI, Team S1-G4, Harley Spring 2018 üyesi

IUPUI-HARLEY-S18S1G4

7 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 4

Son 30 gün: 22

Her zaman: 281