Ana içeriğe geç
  1. To turn on the Bill Break function, go to RT config and check the box marked bill break. To turn on the Bill Break function, go to RT config and check the box marked bill break.
    • To turn on the Bill Break function, go to RT config and check the box marked bill break.

  2. To configure the Bill Break click on the Bill Break Config button. Once you’re in there you’ll have three options. Add, Edit, and Delete.    If you select delete it will get rid of an acceptable denomination.
    • To configure the Bill Break click on the Bill Break Config button.

    • Once you’re in there you’ll have three options. Add, Edit, and Delete. If you select delete it will get rid of an acceptable denomination.

    • Add will bring up a screen where you can select a new denomination that the machine will break and how it’s given to you once it is broken.

    • In order to select Edit you will have to select one of the already existing denominations. After you’ve done so and you click Edit it will allow you to change how the denomination is broken.

    • If you select delete it will get rid of an acceptable denomination.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Timothy Morse

Üyelik tarihi: 30-12-2015

1.171 İtibar

6 adet Kılavuz yazıldı

Takım

The Curo Group The Curo Group üyesi

Community

2 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 2

Her zaman: 63