Ana içeriğe geç

MAGNAVOX MDV2300 Power Cord Replacement

Neye ihtiyacın var

  1. MAGNAVOX MDV2300 Power Cord Replacement, Power Cord: adım 1, 1 resimden 1.
    • Make sure the device is unplugged from the wall.

  2. MAGNAVOX MDV2300 Power Cord Replacement: adım 2, 1 resimden 1.
    • Unscrew the two screws that hold together the top panel.

  3. MAGNAVOX MDV2300 Power Cord Replacement: adım 3, 1 resimden 1.
    • Remove the top panel.

  4. MAGNAVOX MDV2300 Power Cord Replacement: adım 4, 1 resimden 1.
  5. MAGNAVOX MDV2300 Power Cord Replacement: adım 5, 2 resimden 1. MAGNAVOX MDV2300 Power Cord Replacement: adım 5, 2 resimden 2.
    • Remove disc drive by unscrewing the 2 screws that hold the drive in place.

  6. MAGNAVOX MDV2300 Power Cord Replacement: adım 6, 1 resimden 1.
    • Identify the power cord.

    • The cord must either be too short or torn to warrant replacement.

  7. MAGNAVOX MDV2300 Power Cord Replacement: adım 7, 1 resimden 1.
    • Cut the old wire out from the chip.

    • Attach the new wire into the housing.

    • Line up new wire with the appropriate holes and solder to board.

    • The white wire will be your neutral and the black wire will be your negative. View link of how to solder in order to replace the power cord. http://www.instructables.com/id/How-to-s...

Sonuç

After soldering, let cool and then reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Justin

Üyelik tarihi: 01/21/15

298 İtibar

2 adet Kılavuz yazıldı

Ekip

Penn State, Team 1-41, Kaschak Winter 2015 Penn State, Team 1-41, Kaschak Winter 2015 üyesi

PSU-KASCHAK-W15S1G41

4 Üyeler

2 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 3

Son 30 gün: 7

Her zaman: 505