Ana içeriğe geç

Giriş

This guide will show a user how to replace the back cover on the MSI Apache Pro 004 laptop.

Parçalar

Hiçbir parça belirtilmedi.

  1. Start with the bottom of the laptop facing up.
    • Start with the bottom of the laptop facing up.

  2. Remove the 15 screws from the bottom of the laptop with a PH1 screwdriver. Remove the bottom plate
    • Remove the 15 screws from the bottom of the laptop with a PH1 screwdriver.

    • Remove the bottom plate

    • Keep track of all the screws and which slot they came from, as they slightly differ. We recommend this system: lay out on a piece of paper and pretending the paper is the device. Place the screws on the paper approximately where they would go

  3. Remove the screw holding down the battery with a PH1 screwdriver. Pull out the battery. Pull out the battery.
    • Remove the screw holding down the battery with a PH1 screwdriver.

    • Pull out the battery.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Arian Arana

Üyelik tarihi: 13-02-2018

112 İtibar

1 Kılavuz yazıldı

Takım

USF Tampa, Team S15-G5, Boczar Spring 2018 USF Tampa, Team S15-G5, Boczar Spring 2018 üyesi

USFT-BOCZAR-S18S15G5

4 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 11

Son 7 Gün: 59

Son 30 Gün: 231

Her zaman: 2,466