Ana içeriğe geç

Parçalar

Hiçbir parça belirtilmedi.

  1. Insert iFixit opening tool as shown in the picture to pry up on the keyboard guard. Remove the keyboard guard. Remove the keyboard guard.
    • Insert iFixit opening tool as shown in the picture to pry up on the keyboard guard.

    • Remove the keyboard guard.

  2. iPhone Pil Tamir Setleri

    Only $29.99

    Buy Now

    iPhone Pil Tamir Setleri

    Only $29.99

    Buy Now
  3. Insert the iFixit tool under the plastic screw cover. Grab the plastic part with your hand and lift it off the casing. Remove the plastic part to reveal the screws holding the keyboard in place.
    • Insert the iFixit tool under the plastic screw cover.

    • Grab the plastic part with your hand and lift it off the casing.

    • Remove the plastic part to reveal the screws holding the keyboard in place.

  4. Unscrew the five screws located at the top of the keyboard. Use the opening tool to lift the keyboard from its position Be mindful of the ribbon cables when lifting the keyboard from the palmrest.
    • Unscrew the five screws located at the top of the keyboard.

    • Use the opening tool to lift the keyboard from its position

    • Be mindful of the ribbon cables when lifting the keyboard from the palmrest.

Sonuç

To reassemble your device, follow these instructions in reverse order.

mazin

Üyelik tarihi: 27-09-2018

97 İtibar

1 Kılavuz yazıldı

Bir Yorum

What about step 4 detaching the ribbon cable?

russell89000 - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 6

Son 7 Gün: 12

Son 30 Gün: 37

Her zaman: 282