Mac Pro Late 2013 Power Supply Assembly Replacement - iFixit Tamir Kılavuzu

Giriş

Prereq only.

Neye ihtiyacın var

Adım 1 Power Supply Assembly

Mac Pro Late 2013 Power Supply Assembly Replacement, Power Supply Assembly: adım 1, 1 resimden 1.

Flip the Mac Pro back over and set it gently on a flat surface.
We recommend laying the Mac Pro on the corner of the heat sink and the two standoff screw posts that attach to the interconnect board.

Adım 2

Mac Pro Late 2013 Power Supply Assembly Replacement: adım 2, 2 resimden 1.

Mac Pro Late 2013 Power Supply Assembly Replacement: adım 2, 2 resimden 2.

Remove the two 3.6 mm T5 Torx screws from the sides of the power supply cage (one on each side).

Adım 3

Mac Pro Late 2013 Power Supply Assembly Replacement: adım 3, 1 resimden 1.

Remove the power supply cage from the top of the power supply.
By removing this cage, you are exposing internal components of the power supply. Be very careful not to touch any of the power supply components or circuitry.
Be careful not to drop any screws or tools into the power supply, as this may damage the power supply.

Adım 4

Mac Pro Late 2013 Power Supply Assembly Replacement: adım 4, 1 resimden 1.

Remove the four 5.5 mm T8 Torx screws securing the power supply assembly to the Mac Pro.

Adım 5

Mac Pro Late 2013 Power Supply Assembly Replacement: adım 5, 1 resimden 1.

Remove the power supply assembly from the Mac Pro.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

1 tane daha katılımcı ile

Andrew Optimus Goldheart

Üyelik tarihi: 10/17/09

508.631 İtibar

407 adet Kılavuz yazıldı

+41 tane daha rozet

Ekip

iFixit iFixit üyesi

Staff

118 Üyeler

19.420 adet Kılavuz yazıldı

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 4

Son 30 gün: 4

Her zaman: 111