Ana içeriğe geç

Giriş

Use this guide to replace a damaged lower case.

    • Before proceeding, power down your MacBook. Close the display and lay it on a soft surface, top-side down.

    • Use a P5 Pentalobe driver to remove ten screws securing the lower case, of the following lengths:

    • Two 9 mm screws

    • Eight 2.6 mm screws

  1. Wedge your fingers between the display and the lower case and pull upward to pop the lower case off the Air.
    • Wedge your fingers between the display and the lower case and pull upward to pop the lower case off the Air.

    • Remove the lower case and set it aside.

Sonuç

To reassemble your device, follow these instructions in reverse order.

6 farklı kişi bu kılavuzu tamamladı.

Jeff Suovanen

Üyelik tarihi: 06-08-2013

255.646 İtibar

216 adet Kılavuz yazıldı

Takım

iFixit iFixit üyesi

Community

108 Üyeler

9.536 adet Kılavuz yazıldı

0 Comments

Yorum Ekle

İstatistikleri Görüntüle:

Past 24 Hours: 2

Past 7 Days: 12

Past 30 Days: 65

Her zaman: 8,861