Giriş

Use this guide to replace a damaged lower case.

    • Before proceeding, power down your machine. Close the display and lay it on a soft surface top-side down.

    • Remove the following ten screws:

      • Two 9 mm P5 Pentalobe screws

      • Eight 2.6 mm P5 Pentalobe screws

    • The special screwdriver needed to remove the ten 5-point Pentalobe screws can be found here.

  1. Wedge your fingers between the display and the lower case and pull upward to pop the lower case off the Air.
    • Wedge your fingers between the display and the lower case and pull upward to pop the lower case off the Air.

    • Remove the lower case and set it aside.

Sonuç

To reassemble your device, follow these instructions in reverse order.

11 başka kişi bu kılavuzu tamamladı.

Andrew Optimus Goldberg

Üyelik tarihi: 17-10-2009

398.576 İtibar

412 adet Kılavuz yazıldı

Takım

iFixit iFixit üyesi

Community

108 Üyeler

7.526 adet Kılavuz yazıldı

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 Gün: 17

Son 30 Gün: 56

Her zaman: 8,441