MacBook Air 13" Mid 2013 Display Screws Replacement

Giriş

prereq for removing IO board side display screws and heatsink screw

Remove the two 4.9 mm T8 Torx screws securing the antenna cable retainer on the left display hinge to the upper case.

Push the antenna cable retainer out of the way and remove the single 3 mm T5 Torx screw securing the end of the heat sink to the upper case.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Üyelik tarihi: 10/17/09

502.858 İtibar

407 adet Kılavuz yazıldı

Staff

135 Üyeler

16.817 adet Kılavuz yazıldı