Eşyalarını Tamir Et Topluluk Mağaza

MacBook Core Duo RAM Replacement

Giriş

Accessing the RAM in this computer is straightforward and requires minimal disassembly. Two RAM slots allow up to 2 GB of PC2-5300 RAM.

Neye ihtiyacın var

  1. MacBook Core Duo RAM Replacement, Battery: adım 1, 1 resimden 1.

    • Use a coin or spudger to rotate the battery-locking screw 90 degrees clockwise.

    Düzenle

  2. MacBook Core Duo RAM Replacement: adım 2, 1 resimden 1.

    • Lift the battery out of the computer.

    Düzenle

  4. MacBook Core Duo RAM Replacement, Memory Cover: adım 3, 1 resimden 1.

    • Remove the three evenly-spaced Phillips screws from along the rear wall of the battery compartment.

    • The screws are captive to the metal memory cover.

    • When replacing the battery casing, use a spudger to re-insert the foam cushioning behind the rear wall for propper battery spacing.

    Düzenle

  5. MacBook Core Duo RAM Replacement: adım 4, 1 resimden 1.

    • Lift up on L-shaped memory cover, slide it to the right, and lift it out of the computer.

    Düzenle

  6. MacBook Core Duo RAM Replacement, RAM: adım 5, 1 resimden 1.

    • In one swift but careful motion, flick the levers to the left and slide the RAM chip out from its compartment.

    • Unlike the iBook line, the MacBook has two RAM slots, which allows for up to 2 GBs of memory.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

128 farklı kişi bu kılavuzu tamamladı.

Yazar

5 tane daha katılımcı ile

iRobot

Üyelik tarihi: 09/24/09

1 İtibar

636 adet Kılavuz yazıldı

Rozetler: 36

+33 tane daha rozet

5Kılavuz Yorumları

I followed these direction to upgrade my ram from 2 512MB chips to 2 1GB chips. They were simple, but I hit a snag somewhere because when I went to turn back on my computer the light on the slide just blinked several times and no start up ocurred. How do you know that the new RAM chips are in sufficiently? Do you have to press them in until they click or lock? Mine just slid in and are somewhat "loose" still.

thanks!

Madeleine - Yanıt

Madeline I have the same question about re inserting the ram but can't find an answer

did you?

Hank

hlsilvia@flhi.org

hank1930 -

I have followed the steps and the computer kept crashing when i started it with the RAM. Once i put the old pne back in, it started as smootly as before: i think these RAMs are not compatible with the A1181 model.

chnafou - Yanıt

I don't know why some people are mentioning a torx. This is a regular phillips. Had one laying around from my old-style mac mini upgrade. It couldn't be easier. It's almost like the new style mac mini ram upgrade. So effortless.

Maximillian Charles - Yanıt

Please note. The ram modules have to be pushed all the way in until they click in place. You have to push them quite hard to do this. If the ram modules just slide in until they stop then they won’t make contact.

Patch - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 10

Son 30 gün: 39

Her zaman: 123,937