Ana içeriğe geç

What you need

    • Remove the following ten screws securing the lower case to the upper case:

    • Two 2.3 mm P5 Pentalobe screws

    • Eight 3.0 mm P5 Pentalobe screws

    • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your device.

  1. MacBook Pro 13" Retina Display Early 2013 Lower Case Replacement: adım 2, 1 resimden 1.
    • Wedge your fingers between the upper case and the lower case.

    • Gently pull the lower case away from the upper case.

    • Remove the lower case and set it aside.

  2. MacBook Pro 13" Retina Display Early 2013 Lower Case Replacement: adım 3, 3 resimden 1. MacBook Pro 13" Retina Display Early 2013 Lower Case Replacement: adım 3, 3 resimden 2. MacBook Pro 13" Retina Display Early 2013 Lower Case Replacement: adım 3, 3 resimden 3.
    • During reassembly, gently push down the center of the lower case to reattach the two plastic clips.

    • The lower case is connected to the upper case at the center, with two plastic clips.

Sonuç

To reassemble your device, follow these instructions in reverse order.

3 farklı kişi bu kılavuzu tamamladı.

Sam Goldheart

Üyelik tarihi: 18-10-2012

455.679 İtibar

548 adet Kılavuz yazıldı

Team

iFixit iFixit üyesi

Community

139 Üyeler

15.810 adet Kılavuz yazıldı

0 Comments

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 12

Son 30 gün: 70

Her zaman: 10,243