Eşyalarını Tamir Et Topluluk Mağaza

MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement

Salt Önkoşul
Bu kılavuz yalnızca diğer kılavuzlar için bir ön koşul olarak kullanılmak üzere tasarlanmıştır. Tek başına eksiktir.

Giriş

Prereq to remove the logic board

Neye ihtiyacın var

  1. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement, Logic Board Assembly: adım 1, 2 resimden 1. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement, Logic Board Assembly: adım 1, 2 resimden 2.

    • Remove the two 2.1 mm T5 Torx screws securing the I/O board cable bracket to the logic board.

    • Remove the I/O board cable bracket.

    Düzenle

  2. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: adım 2, 2 resimden 1. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: adım 2, 2 resimden 2.

    • Use the flat end of a spudger to pop the I/O board connector straight up off its socket on the logic board.

    • Be careful to only pry up on the I/O board cable, not on the socket itself or you risk damaging your logic board.

    Düzenle

  3. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: adım 3, 2 resimden 1. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: adım 3, 2 resimden 2.

    • Lift the logic board end of the I/O board cable straight up to bend it out of the way.

    • To avoid damage to the cable, fold only at the bend in the I/O board end of the cable.

    Düzenle

  4. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: adım 4, 2 resimden 1. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: adım 4, 2 resimden 2.

    • Use the tip of a spudger to lift the right speaker connector straight up out of its socket on the logic board.

    Düzenle

  5. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: adım 5, 2 resimden 1. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: adım 5, 2 resimden 2.

    • With the tip of a spudger, push on either side of the I/O board connector to walk it out of its socket on the logic board.

    Düzenle

  6. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: adım 6, 3 resimden 1. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: adım 6, 3 resimden 2. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: adım 6, 3 resimden 3.

    • Use the flat end of a spudger to disconnect the keyboard backlight cable and bend it up out of the way of the logic board.

    Düzenle

  8. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: adım 7, 3 resimden 1. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: adım 7, 3 resimden 2. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: adım 7, 3 resimden 3.

    • Grab the black plastic tab to flip the display cable connector open and pull it straight out of its socket on the logic board.

    Düzenle

  9. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: adım 8, 2 resimden 1. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: adım 8, 2 resimden 2.

    • Carefully pull the DC-In board connector straight out of its socket on the logic board.

    Düzenle

  10. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: adım 9, 3 resimden 1. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: adım 9, 3 resimden 2. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: adım 9, 3 resimden 3.

    • Wedge the flat end of a spudger under the left speaker cable near the connector and lift it straight up out of its socket and fold it out of the way.

    Düzenle

  11. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: adım 10, 2 resimden 1. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: adım 10, 2 resimden 2.

    • If necessary, peel back any tape covering the microphone cable ZIF connector.

    Düzenle

  12. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: adım 11, 3 resimden 1. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: adım 11, 3 resimden 2. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: adım 11, 3 resimden 3.

    • Use the tip of a spudger to flip the retaining tab on the microphone cable ZIF connector.

    • Pull the microphone cable out of its socket on the logic board.

    Düzenle

  13. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: adım 12, 3 resimden 1. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: adım 12, 3 resimden 2. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: adım 12, 3 resimden 3.

    • If necessary, peel back any tape covering the keyboard cable connector.

    • Use the tip of a spudger to flip the retaining tab on the ZIF connector.

    Düzenle

  14. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: adım 13, 2 resimden 1. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: adım 13, 2 resimden 2.

    • Pull the keyboard cable straight out of its ZIF socket on the logic board.

    Düzenle

  15. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: adım 14, 3 resimden 1. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: adım 14, 3 resimden 2. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: adım 14, 3 resimden 3.

    • If necessary, peel back any tape covering the trackpad cable connector.

    • Use the tip of a spudger to flip the retaining tab on the ZIF connector.

    Düzenle

  16. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: adım 15, 2 resimden 1. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: adım 15, 2 resimden 2.

    • Pull the trackpad ribbon cable straight out of its socket on the logic board.

    Düzenle

  17. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: adım 16, 1 resimden 1.

    • Remove the five 3.5 mm T5 Torx screws securing the logic board to the upper case.

    • When reassembling, install all five screws loosely, position the logic board, and then tighten evenly.

    Düzenle

  18. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: adım 17, 3 resimden 1. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: adım 17, 3 resimden 2. MacBook Pro 13" Retina Display Late 2013 Logic Board Assembly Replacement: adım 17, 3 resimden 3.

    • Lift the processor end of the logic board up slightly and pull it toward the fan recess to free the ports from the edge of the upper case.

    • Remove the logic board.

    • When reinstalling, make sure the keyboard, keyboard backlight, MagSafe, and microphone cables don't get trapped beneath the logic board.

    • Also be sure to slide the ports' metal EMI fingers under the side of the case, not over.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

2 tane daha katılımcı ile

Sam Goldheart

Üyelik tarihi: 10/18/12

471.895 İtibar

538 adet Kılavuz yazıldı

Rozetler: 48

+45 tane daha rozet

Ekip

iFixit iFixit üyesi

Staff

119 Üyeler

19.657 adet Kılavuz yazıldı

1Rehber Yorum

Thanks for the the instructions. I have a question that I couldn’t find on the answers forums. Is there any thermal paste or just general cooling system considerations when replacing the logic board?

Brad Bowman - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 21

Her zaman: 271