Ana içeriğe geç

Bu kılavuzda güncel değişiklikler var. En son onaylanmamış sürüme geçin.

MacBook Pro 13" Unibody Early 2011 Hard Drive Replacement

Salt Önkoşul
Bu kılavuz yalnızca diğer kılavuzlar için bir ön koşul olarak kullanılmak üzere tasarlanmıştır. Tek başına eksiktir.

Neye ihtiyacın var

  1. MacBook Pro 13" Unibody Early 2011 Hard Drive Replacement, Hard Drive: adım 1, 1 resimden 1.
    • Remove the two Phillips screws securing the hard drive bracket to the upper case.

    • These screws will remain attached to the hard drive bracket.

  2. MacBook Pro 13" Unibody Early 2011 Hard Drive Replacement: adım 2, 1 resimden 1.
    • Remove the hard drive bracket.

    • The hard drive bracket may be firmly seated against the upper case.

  3. MacBook Pro 13" Unibody Early 2011 Hard Drive Replacement: adım 3, 1 resimden 1.
    • Use the attached pull tab to lift the hard drive out of the upper case.

    • Don't try to completely remove the hard drive just yet. It is still attached to the hard drive cable.

  4. MacBook Pro 13" Unibody Early 2011 Hard Drive Replacement: adım 4, 2 resimden 1. MacBook Pro 13" Unibody Early 2011 Hard Drive Replacement: adım 4, 2 resimden 2.
    • Pull the hard drive cable away from the body of the hard drive.

    • Remove the hard drive.

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 1,323