Ana içeriğe geç

MacBook Pro 13" Unibody Early 2011 Lower Case Replacement

Neye ihtiyacın var

  1. MacBook Pro 13" Unibody Early 2011 Lower Case Replacement, Lower Case: adım 1, 1 resimden 1.
    • Remove the following ten screws:

    • Three 14.4 mm Phillips #00 screws

    • Three 3.5 mm Phillips #00 screws

    • Four 3.5 mm shouldered Phillips #00 screws

    • When replacing the small screws, align them perpendicular to the slight curvature of the case (they don't go straight down).

  2. MacBook Pro 13" Unibody Early 2011 Lower Case Replacement: adım 2, 2 resimden 1. MacBook Pro 13" Unibody Early 2011 Lower Case Replacement: adım 2, 2 resimden 2.
    • Use your fingers to pry the lower case away from the body of the MacBook near the vent.

    • Remove the lower case.

Sonuç

To reassemble your device, follow these instructions in reverse order.

60 farklı kişi bu kılavuzu tamamladı.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 13

Son 30 gün: 51

Her zaman: 36,052