Ana içeriğe geç

MacBook Pro 13" Unibody Mid 2012 Lower Case Replacement

Neye ihtiyacın var

  1. MacBook Pro 13" Unibody Mid 2012 Lower Case Replacement, Lower Case: adım 1, 1 resimden 1.
    • Remove the following ten screws:

    • Three 14.4 mm Phillips #00 screws

    • Three 3.5 mm Phillips #00 screws

    • Four 3.5 mm shouldered Phillips #00 screws

    • When replacing the small screws, align them perpendicular to the slight curvature of the case (they don't go straight down).

  2. MacBook Pro 13" Unibody Mid 2012 Lower Case Replacement: adım 2, 2 resimden 1. MacBook Pro 13" Unibody Mid 2012 Lower Case Replacement: adım 2, 2 resimden 2.
    • Use your fingers to pry the lower case away from the body of the MacBook near the vent.

    • Remove the lower case.

Sonuç

To reassemble your device, follow these instructions in reverse order.

85 farklı kişi bu kılavuzu tamamladı.

Andrew Optimus Goldheart

Üyelik tarihi: 10/17/09

504.362 İtibar

407 adet Kılavuz yazıldı

Ekip

iFixit iFixit üyesi

Staff

140 Üyeler

18.086 adet Kılavuz yazıldı

7 Yorum

When purchasing a new bottom panel, do any of the stickers or pads have to be transferred to the new part? How?

Matthew Parrott - Yanıt

This is the instructions on how to just remove the bottom cover to access other components. The part is sold here on iFixit for $99 and looks to include the rubber feet.

Cwoodyard -

Where can I get a new backover?

SkyGamer - Yanıt

The back cover is sold here and can be found at the top of the page.

Cwoodyard -

Can i buy this bottom replacement piece here or is this instructions on how to do it?

itsRadioBiz - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 4

Son 7 gün: 28

Son 30 gün: 158

Her zaman: 65,434