Ana içeriğe geç

Giriş

Pre-req only

Parçalar

Hiçbir parça belirtilmedi.

  1. Peel back the warning label covering the battery connector.
    • Peel back the warning label covering the battery connector.

  2. Using the flat end of a spudger, gently pry the battery connector straight up out of its socket on the logic board. Bend the battery cables back and out of the way, ensuring that the battery connector doesn't accidentally make contact with the logic board.
    • Using the flat end of a spudger, gently pry the battery connector straight up out of its socket on the logic board.

    • Bend the battery cables back and out of the way, ensuring that the battery connector doesn't accidentally make contact with the logic board.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Brett Hartt

Üyelik tarihi: 12-04-2010

113.311 İtibar

143 adet Kılavuz yazıldı

Takım

iFixit iFixit üyesi

Community

101 Üyeler

9.065 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 4

Her zaman: 380