Ana içeriğe geç

Giriş

Input, Output, Sideput. Whatever kind of puting you will be doing, a faulty I/O board cable is going to severely limit the functionality of your MacBook Pro with Retina display. This guide will show you how to replace it.

  1. Remove the following P5 pentalobe screws securing the lower case to the MacBook Pro:
    • Remove the following P5 pentalobe screws securing the lower case to the MacBook Pro:

    • Eight 3.0 mm

    • Two 2.3 mm

  2. Lifting from the edge nearest the clutch cover, lift the lower case off the MacBook Pro.
    • Lifting from the edge nearest the clutch cover, lift the lower case off the MacBook Pro.

    • Set the lower case aside.

  3. Dizüstü Bilgisayar Bataryaları

    An easy fix for a big power boost.

    Hemen Alışveriş Yapın

    Dizüstü Bilgisayar Bataryaları

    An easy fix for a big power boost.

    Hemen Alışveriş Yapın
  4. Peel back the warning label covering the battery connector.
    • Peel back the warning label covering the battery connector.

  5. Using the flat end of a spudger, gently pry the battery connector straight up out of its socket on the logic board. Bend the battery cables back and out of the way, ensuring that the battery connector doesn't accidentally make contact with the logic board.
    • Using the flat end of a spudger, gently pry the battery connector straight up out of its socket on the logic board.

    • Bend the battery cables back and out of the way, ensuring that the battery connector doesn't accidentally make contact with the logic board.

  6. Using the flat end of a spudger, pry the I/O board cable straight up out of its socket on the I/O board. In a similar fashion, remove the I/O board cable from its socket on the I/O board. In a similar fashion, remove the I/O board cable from its socket on the I/O board.
    • Using the flat end of a spudger, pry the I/O board cable straight up out of its socket on the I/O board.

    • In a similar fashion, remove the I/O board cable from its socket on the I/O board.

  7. Remove the I/O board cable from the MacBook Pro.
    • Remove the I/O board cable from the MacBook Pro.

Sonuç

To reassemble your device, follow these instructions in reverse order.

10 farklı kişi bu kılavuzu tamamladı.

Brett Hartt

Üyelik tarihi: 12-04-2010

113.289 İtibar

143 adet Kılavuz yazıldı

Takım

iFixit iFixit üyesi

Community

101 Üyeler

9.044 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 Gün: 15

Son 30 Gün: 46

Her zaman: 6,510