Eşyalarını Tamir Et Topluluk Mağaza

MacBook Pro 15" Retina Display Mid 2012 Logic Board Assembly Replacement

Salt Önkoşul
Bu kılavuz yalnızca diğer kılavuzlar için bir ön koşul olarak kullanılmak üzere tasarlanmıştır. Tek başına eksiktir.

Giriş

Pre-req only.

Neye ihtiyacın var

  1. MacBook Pro 15" Retina Display Mid 2012 Logic Board Assembly Replacement, Logic Board Assembly: adım 1, 1 resimden 1.

    • Use the flat end of a spudger to pry the headphone jack connector up from its socket on the logic board.

    Düzenle

  2. MacBook Pro 15" Retina Display Mid 2012 Logic Board Assembly Replacement: adım 2, 2 resimden 1. MacBook Pro 15" Retina Display Mid 2012 Logic Board Assembly Replacement: adım 2, 2 resimden 2.

    • Use the flat end of a spudger to pry the left speaker connector up and out of its socket on the logic board.

    • Use the tip of a spudger to pry the right speaker connector up and out of its socket on the logic board

    • Be sure to pry on the cable head, and not on the socket itself. Prying on the socket may cause it to separate from the logic board.

    Düzenle

  3. MacBook Pro 15" Retina Display Mid 2012 Logic Board Assembly Replacement: adım 3, 1 resimden 1.

    • Peel back any tape covering the keyboard ribbon cable connector.

    Düzenle

  4. MacBook Pro 15" Retina Display Mid 2012 Logic Board Assembly Replacement: adım 4, 3 resimden 1. MacBook Pro 15" Retina Display Mid 2012 Logic Board Assembly Replacement: adım 4, 3 resimden 2. MacBook Pro 15" Retina Display Mid 2012 Logic Board Assembly Replacement: adım 4, 3 resimden 3.

    • Use the flat end of a spudger to flip up the retaining flap on the keyboard ribbon cable ZIF socket.

    • Pry only under the hinged retaining flap, not the socket itself, or you may break it off the board.

    • Use the flat end of a spudger to gently back the keyboard ribbon cable out of its socket by pushing first at one side, then the other.

    Düzenle

  6. MacBook Pro 15" Retina Display Mid 2012 Logic Board Assembly Replacement: adım 5, 1 resimden 1.

    • Use the flat end of a spudger to pry the trackpad ribbon cable connector up from its socket on the logic board.

    Düzenle

  7. MacBook Pro 15" Retina Display Mid 2012 Logic Board Assembly Replacement: adım 6, 1 resimden 1.

    • Use the flat end of a spudger to pry the keyboard backlight connector up from its socket on the logic board.

    Düzenle

  8. MacBook Pro 15" Retina Display Mid 2012 Logic Board Assembly Replacement: adım 7, 1 resimden 1.

    • Use the tip of a spudger or your fingernail to flip up the retaining flap on the microphone ribbon cable ZIF socket.

    • Be sure you are prying up on the hinged retaining flap, not the socket itself.

    • Pull the microphone ribbon cable out of its socket.

    Düzenle

  9. MacBook Pro 15" Retina Display Mid 2012 Logic Board Assembly Replacement: adım 8, 2 resimden 1. MacBook Pro 15" Retina Display Mid 2012 Logic Board Assembly Replacement: adım 8, 2 resimden 2.

    • Use the tip of a spudger to pry the display data cable lock and rotate it toward the DC-In side of the computer.

    • Pull the display data cable straight out of its socket on the logic board.

    • Do not lift up on the display data cable, as its socket is very fragile. Pull the cable parallel to the face of the logic board.

    Düzenle

  10. MacBook Pro 15" Retina Display Mid 2012 Logic Board Assembly Replacement: adım 9, 1 resimden 1.

    • Use the flat end of a spudger to carefully pry off the rubber screw cap on the raised screw head near to the MagSafe 2 connector.

    Düzenle

  11. MacBook Pro 15" Retina Display Mid 2012 Logic Board Assembly Replacement: adım 10, 1 resimden 1.

    • Remove the following six screws securing the logic board to to the upper case:

    • One 2.6 mm T5 Torx screw

    • Two 5.8 mm T5 Torx screws

    • One 3.8 mm T5 Torx screw

    • One 5.2 mm Raised Head T5 Torx screw

    • One 3.5 mm Silver T5 Torx screw

    Düzenle

  12. MacBook Pro 15" Retina Display Mid 2012 Logic Board Assembly Replacement: adım 11, 3 resimden 1. MacBook Pro 15" Retina Display Mid 2012 Logic Board Assembly Replacement: adım 11, 3 resimden 2. MacBook Pro 15" Retina Display Mid 2012 Logic Board Assembly Replacement: adım 11, 3 resimden 3.

    • Lifting from the side nearest the battery, rotate the logic board toward the top of the MacBook Pro.

    • Using the flat end of a spudger, carefully push the MagSafe 2 connector out of its socket on the bottom of the logic board.

    • When reinstalling the logic board, check the cables at the marked locations to make sure they don't get pinned underneath the logic board.

    • Clockwise from top: keyboard, trackpad, battery, right speaker, keyboard backlight, display, microphone, headphone jack, left speaker.

    Düzenle

  13. MacBook Pro 15" Retina Display Mid 2012 Logic Board Assembly Replacement: adım 12, 1 resimden 1.

    • Remove the logic board assembly from the MacBook Pro.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Yazar

8 tane daha katılımcı ile

Brett Hartt

Üyelik tarihi: 04/12/10

129.875 İtibar

143 adet Kılavuz yazıldı

Rozetler: 52

+49 tane daha rozet

Ekip

iFixit iFixit üyesi

Staff

118 Üyeler

19.656 adet Kılavuz yazıldı

0Kılavuz Yorumları

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 17

Her zaman: 843