Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

Giriş

Use this guide to replace the AirPort board.

  1. Remove the following P5 pentalobe screws securing the lower case to the MacBook Pro:
    • Remove the following P5 pentalobe screws securing the lower case to the MacBook Pro:

    • Eight 3.0 mm

    • Two 2.3 mm

  2. Lifting from the edge nearest the clutch cover, lift the lower case off the MacBook Pro.
    • Lifting from the edge nearest the clutch cover, lift the lower case off the MacBook Pro.

    • Set the lower case aside.

  3. LCD iPhone Ekran Tamir Kit'leri

    Ömür Boyu Garantimiz kapsamındaki bütçe seçeneği.

    Shop Kits

    LCD iPhone Ekran Tamir Kit'leri

    Onarım maliyetlerini düşürün, kaliteyi değil.

    Shop Kits
  4. Peel back the warning label covering the battery connector.
    • Peel back the warning label covering the battery connector.

  5. Using the flat end of a spudger, gently pry the battery connector straight up out of its socket on the logic board. Bend the battery cables back and out of the way, ensuring that the battery connector doesn't accidentally make contact with the logic board.
    • Using the flat end of a spudger, gently pry the battery connector straight up out of its socket on the logic board.

    • Bend the battery cables back and out of the way, ensuring that the battery connector doesn't accidentally make contact with the logic board.

  6. Use the tip of a spudger to detach the three antenna connectors up from their sockets on the AirPort board.
    • Use the tip of a spudger to detach the three antenna connectors up from their sockets on the AirPort board.

  7. Remove the single 2.9 mm T5 Torx screw securing the AirPort board to the logic board. Grasp the edges of the board and slide it out from its connector.
    • Remove the single 2.9 mm T5 Torx screw securing the AirPort board to the logic board.

    • Grasp the edges of the board and slide it out from its connector.

    • Lift and remove the AirPort board.

Sonuç

To reassemble your device, follow these instructions in reverse order.

5 farklı kişi bu kılavuzu tamamladı.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 3

Son 7 gün: 32

Son 30 gün: 139

Her zaman: 17,004