Ana içeriğe geç

Parçalar

Hiçbir parça belirtilmedi.

  1. heat the logo baffle(用吹风机小心的加热LOGO挡板) use sharp tweezers,carefully insert the screen gap,pull it out(用尖利的镊子或者刀片小心的撬起LOGO挡板,然后把logo挡板拉出来,玻璃材质的很易碎) use sharp tweezers,carefully insert the screen gap,pull it out(用尖利的镊子或者刀片小心的撬起LOGO挡板,然后把logo挡板拉出来,玻璃材质的很易碎)
    • heat the logo baffle(用吹风机小心的加热LOGO挡板)

    • use sharp tweezers,carefully insert the screen gap,pull it out(用尖利的镊子或者刀片小心的撬起LOGO挡板,然后把logo挡板拉出来,玻璃材质的很易碎)

  2. Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now

    Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now
  3. Put double-sided tape on the back of the baffle(在新的挡板后面贴上双面胶带)
    • Put double-sided tape on the back of the baffle(在新的挡板后面贴上双面胶带)

  4. Install the baffle 把挡板安装到原来的位置
    • Install the baffle 把挡板安装到原来的位置

Sonuç

当重新组装你的设备时,请按照说明的相反顺序进行操作。

8 farklı kişi bu kılavuzu tamamladı.

n0vem

Üyelik tarihi: 26-08-2017

333 İtibar

1 Kılavuz yazıldı

34 Yorum

I didn't manage to get it off without breaking it so had to order a new one. which was a peal and stick.

mayer - Yanıt

I don’t understand, when do you need to remove this if it’s not broken already? Are there components underneath that can be replaced/fixed?

Ted -

I have a hairline at the logo baffle if i do not replace it will my screen get harmed?

Please reply ASAP?

Honey - Yanıt

can u upload the photo, than I can tell u

n0vem -

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 13

Son 7 Gün: 111

Son 30 Gün: 483

Her zaman: 18,060