MacBook Pro 15" Unibody Mid 2012 Lower Case Replacement

Bu kılavuzda güncel değişiklikler var. En son onaylanmamış sürüme geçin.

Giriş

Remove the lower case to access most of your MacBook Pro's internals.

Remove the following ten screws securing the lower case to the upper case:
Three 13.5 mm (14.1 mm) Phillips screws.
Seven 3 mm Phillips screws.
When removing these screws, note how they come out at a slight angle. They must be reinstalled the same way.

Using both hands, lift the lower case near the vent to pop it off two clips securing it to the upper case.
Remove the lower case and set it aside.

Sonuç

To reassemble your device, follow these instructions in reverse order.

21 farklı kişi bu kılavuzu tamamladı.

Üyelik tarihi: 10/17/09

502.786 İtibar

407 adet Kılavuz yazıldı

Staff

135 Üyeler

16.767 adet Kılavuz yazıldı