Eşyalarını Tamir Et Topluluk Mağaza

Bu kılavuzda güncel değişiklikler var. En son onaylanmamış sürüme geçin.

MacBook Unibody Model A1342 Hard Drive Replacement

Salt Önkoşul
Bu kılavuz yalnızca diğer kılavuzlar için bir ön koşul olarak kullanılmak üzere tasarlanmıştır. Tek başına eksiktir.

Giriş

This guide is an internal private guide used as a prereq.

Neye ihtiyacın var

  1. MacBook Unibody Model A1342 Hard Drive Replacement, Hard Drive: adım 1, 1 resimden 1.

    • Remove two 11 mm Phillips screws securing the hard drive bracket to the upper case.

    • These screws are captive in the hard drive bracket.

    Düzenle

  2. MacBook Unibody Model A1342 Hard Drive Replacement: adım 2, 1 resimden 1.

    • Lift the retaining bracket out of the upper case.

    • When putting the bracket back after replacing the drive, it is easy to put in backwards. If it doesn't seat smoothly, then reverse it and try again.

    Düzenle

  4. MacBook Unibody Model A1342 Hard Drive Replacement: adım 3, 3 resimden 1. MacBook Unibody Model A1342 Hard Drive Replacement: adım 3, 3 resimden 2. MacBook Unibody Model A1342 Hard Drive Replacement: adım 3, 3 resimden 3.

    • Lift the hard drive by its pull tab and pull it away from the upper case, minding the cable still attaching it to the logic board.

    • In some revisions of the MacBook A1342, the hard drive bracket may include two rubber brackets (as highlighted in the second picture.) The correct orientation of the rubber brackets is shown in the third picture.

    Düzenle

  5. MacBook Unibody Model A1342 Hard Drive Replacement: adım 4, 2 resimden 1. MacBook Unibody Model A1342 Hard Drive Replacement: adım 4, 2 resimden 2.

    • Remove the hard drive cable by pulling its connector straight away from the hard drive.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 995