Giriş

Please remember that these controllers are not designed to be repaired so do not be surprised if you need to be rough with it or something was not initially installed correctly. Also, the same kind of screw was used throughout the controller.

Remove the six 7 mm Phillips screws from the rear cover.
  • Remove the six 7 mm Phillips screws from the rear cover.

Yorum Ekle

Remove the back of the controller.
  • Remove the back of the controller.

  • There are no loose items in the controller that can fall out, so you can open it, generally, however you want.

Yorum Ekle

Remove the two 7 mm screws on the closest circuit board.
  • Remove the two 7 mm screws on the closest circuit board.

Yorum Ekle

Lift the closest circuit board away from the motherboard. Be sure you do not tear the ribbon connecting the smaller circuit board to the motherboard.
  • Lift the closest circuit board away from the motherboard.

  • Be sure you do not tear the ribbon connecting the smaller circuit board to the motherboard.

Yorum Ekle

Grip the analog stick you wish to remove and the smaller circuit board or the cover.
  • Grip the analog stick you wish to remove and the smaller circuit board or the cover.

  • Pull the analog stick from the smaller circuit board.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Alexander Coyne

Üyelik tarihi: 11-01-2015

604 İtibar

5 adet Kılavuz yazıldı

Takım

USF Tampa, Team 7-2, Remmell Winter 2015 USF Tampa, Team 7-2, Remmell Winter 2015 üyesi

USFT-REMMELL-W15S7G2

4 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 4

Her zaman: 223