Ana içeriğe geç

Maisto Rock Crawler Remote Circuit Board Replacement

Neye ihtiyacın var

  1. Maisto Rock Crawler Remote Circuit Board Replacement, Remote Circuit Board: adım 1, 1 resimden 1.
    • Remove the batteries before doing anything.

    • Use the driver and bit J1 to remove the five 9.5mm Philips screws holding the remote together.

  2. Maisto Rock Crawler Remote Circuit Board Replacement: adım 2, 1 resimden 1.
    • Take off the half of the remote that had the screw heads facing up.

  3. Maisto Rock Crawler Remote Circuit Board Replacement: adım 3, 1 resimden 1.
    • Slide out the circuit board.

    • Use the soldering iron to desolder the 3 wires.

Sonuç

To reassemble your device, follow these instructions in reverse order.

5 farklı kişi bu kılavuzu tamamladı.

kevin

Üyelik tarihi: 02/10/16

874 İtibar

6 adet Kılavuz yazıldı

Ekip

USF Tampa, Team 1-2, Sullivan Spring 2016 USF Tampa, Team 1-2, Sullivan Spring 2016 üyesi

USFT-SULLIVAN-S16S1G2

3 Üyeler

6 adet Kılavuz yazıldı

5 Yorum

Can you show the wheel controller mechanism. I can see 3 contacts on mine but I think mine is missing something that would bring the contacts together as you turn the wheel to steer left and right. Thanks.

Ferdinand Fong - Yanıt

the triger is broken to drive the truck

joey heller - Yanıt

Somebody have the remote control for

Theodore Brock - Yanıt

I have a 1970 R/T charger RC car, 2.4GHz, I changed it up fully, but the pairing light wont come on. But I can show the lights,the control power is good.what is wrong can anybody help me find the problem and fix it.

Keith Pryor - Yanıt

How to pair new controller ?

Karel Říha - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 8

Son 30 gün: 16

Her zaman: 4,558