Eşyalarını Tamir Et Topluluk Mağaza

Makita GA4030K Armature Replacement

Giriş

This is a guide detailing the steps to replace the armature.

Neye ihtiyacın var

  1. Makita GA4030K Armature Replacement, Disk Cover: adım 1, 1 resimden 1.

    • Check for the provided lock nut wrench. This is used for loosening the piece that keeps the disk and cover attached.

    Düzenle

  2. Makita GA4030K Armature Replacement: adım 2, 1 resimden 1.

    • Unscrew the handle unit until it is removed completely.

    Düzenle

  3. Makita GA4030K Armature Replacement: adım 3, 2 resimden 1. Makita GA4030K Armature Replacement: adım 3, 2 resimden 2.

    • Hold the black switch located on the front casing.

    • Still holding the switch, use the lock nut wrench to loosen the silver disk holding everything in place.

    • Once loose, remove the silver disk and/or your grinding disk.

    Düzenle

  4. Makita GA4030K Armature Replacement: adım 4, 2 resimden 1. Makita GA4030K Armature Replacement: adım 4, 2 resimden 2.

    • Use a Phillips #02 screwdriver to remove the 15 mm pan head screw that holds the cover in place.

    • Remove the cover by lining up the knob on the cover with the notch in face plate.

    Düzenle

  6. Makita GA4030K Armature Replacement, Back Cover: adım 5, 2 resimden 1. Makita GA4030K Armature Replacement, Back Cover: adım 5, 2 resimden 2.

    • Unscrew the 20 mm tapping screw using a Philips #02 screwdriver.

    Düzenle

  7. Makita GA4030K Armature Replacement: adım 6, 1 resimden 1.

    • Slide the back cover down the power cable.

    Düzenle

  8. Makita GA4030K Armature Replacement, Armature: adım 7, 2 resimden 1. Makita GA4030K Armature Replacement, Armature: adım 7, 2 resimden 2.

    • Use a spudger to gently move the brush holder coil to the side.

    • There are two brushes that are secured by two separate brush holders, one on each side.

    Düzenle

  9. Makita GA4030K Armature Replacement: adım 8, 2 resimden 1. Makita GA4030K Armature Replacement: adım 8, 2 resimden 2.

    • Using a metal spudger, remove both carbon brushes (one on each side) by their copper cabling.

    Düzenle

  10. Makita GA4030K Armature Replacement: adım 9, 3 resimden 1. Makita GA4030K Armature Replacement: adım 9, 3 resimden 2. Makita GA4030K Armature Replacement: adım 9, 3 resimden 3.

    • Use a Phillips #2 screwdriver to remove the four 20 mm tapping screws that hold the armature assembly in place.

    • Remove the armature assembly

    Düzenle

  11. Makita GA4030K Armature Replacement: adım 10, 2 resimden 1. Makita GA4030K Armature Replacement: adım 10, 2 resimden 2.

    • Unscrew the four 10 mm tapping screws holding the faceplate using a Phillips #02 screwdriver.

    • Remove the faceplate.

    Düzenle

  12. Makita GA4030K Armature Replacement: adım 11, 2 resimden 1. Makita GA4030K Armature Replacement: adım 11, 2 resimden 2.

    • Hold the highlighted nut with a size 10 wrench. Unscrew by turning the armature and holding the nut in place.

    • The nut may be difficult to remove.

    Düzenle

  13. Makita GA4030K Armature Replacement: adım 12, 1 resimden 1.

    • Remove the armature.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

5 farklı kişi bu kılavuzu tamamladı.

Yazar

4 tane daha katılımcı ile

Laura Ann Jagels

Üyelik tarihi: 04/01/15

490 İtibar

3 adet Kılavuz yazıldı

Rozetler: 11

+8 tane daha rozet

Ekip

Cal Poly, Team 12-5, Lancaster Spring 2015 Cal Poly, Team 12-5, Lancaster Spring 2015 üyesi

CPSU-LANCASTER-S15S12G5

4 Üyeler

13 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 3

Son 30 gün: 16

Her zaman: 3,400