Ana içeriğe geç

Manatee V2S Intelligent Clothes Dryer Filter Replacement

Neye ihtiyacın var

  1. Manatee V2S Intelligent Clothes Dryer Filter Replacement, Filter: adım 1, 1 resimden 1.
    • Turn the machine upside down.

  2. Manatee V2S Intelligent Clothes Dryer Filter Replacement: adım 2, 1 resimden 1.
    • Use a Phillips #0 screwdriver to remove the 3.5 mm screw holding the bottom case to the device.

  3. Manatee V2S Intelligent Clothes Dryer Filter Replacement: adım 3, 1 resimden 1.
    • Cut out about 10 cm of scotch tape.

    • Turn it over and go around your hand as shown in the image, which lets the adhesive side on the outside. (Because it is easy to remove dust)

    • You can also use any other ways to remove the dust, but make sure not to break the filter.

  4. Manatee V2S Intelligent Clothes Dryer Filter Replacement: adım 4, 1 resimden 1.
    • Take out the filter.

    • Tap the dust and particles into the garbage, remove the dust with scotch tape, or replace the filter.

  5. Manatee V2S Intelligent Clothes Dryer Filter Replacement: adım 5, 2 resimden 1. Manatee V2S Intelligent Clothes Dryer Filter Replacement: adım 5, 2 resimden 2.
    • Check for broken/loose wiring and other connections.

    • Dust may not be the only reason for the poor performance.

    • Close the lid and replace the screw.

Sonuç

To reassemble your device, follow these instructions in reverse order.

[deleted]

Üyelik tarihi: 09/17/21

121 İtibar

1 Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 6

Son 30 gün: 18

Her zaman: 491