Eşyalarını Tamir Et Topluluk Mağaza

Meepo Mini 5 Truck Bushing Replacement

Giriş

Truck bushing affects the sensitivity of your skateboard turns and on road stability. Bushings wear down over time and need replacements. In this tutorial, we will replace the truck bushing on a Meepo Mini 5 electric skateboard.

Neye ihtiyacın var

  1. Meepo Mini 5 Truck Bushing Replacement, Truck Bushing: adım 1, 2 resimden 1. Meepo Mini 5 Truck Bushing Replacement, Truck Bushing: adım 1, 2 resimden 2.

    • Rotate the half-inch wrench counter-clockwise to loosen the bushing bolt.

    Düzenle

  2. Meepo Mini 5 Truck Bushing Replacement: adım 2, 2 resimden 1. Meepo Mini 5 Truck Bushing Replacement: adım 2, 2 resimden 2.

    • Take out the truck bushing (orange part).

    Düzenle

  3. Meepo Mini 5 Truck Bushing Replacement: adım 3, 1 resimden 1.

    • Take the wheels out of the screw by pulling it toward you.

    Düzenle

  4. Meepo Mini 5 Truck Bushing Replacement: adım 4, 1 resimden 1.

    • Remove the washer from the top of the bushing.

    Düzenle

  6. Meepo Mini 5 Truck Bushing Replacement: adım 5, 1 resimden 1.

    • Take out the bottom bushing (orange part).

    Düzenle

  7. Meepo Mini 5 Truck Bushing Replacement: adım 6, 1 resimden 1.

    • Take off the metal cap from the bushing.

    Düzenle

  8. Meepo Mini 5 Truck Bushing Replacement: adım 7, 1 resimden 1.

    • Replace with the new bushing to the cap.

    Düzenle

  9. Meepo Mini 5 Truck Bushing Replacement: adım 8, 1 resimden 1.

    • Press the bushing back.

    Düzenle

  10. Meepo Mini 5 Truck Bushing Replacement: adım 9, 2 resimden 1. Meepo Mini 5 Truck Bushing Replacement: adım 9, 2 resimden 2.

    • Press the hanger back (wheels)

    • Press the wire and point the semicircular ridge to the hole at the same time as the space is narrow.

    Düzenle

  11. Meepo Mini 5 Truck Bushing Replacement: adım 10, 1 resimden 1.

    • Press the upper bushing and the cap back on.

    Düzenle

  12. Meepo Mini 5 Truck Bushing Replacement: adım 11, 1 resimden 1.

    • Press the pin back on.

    Düzenle

  13. Meepo Mini 5 Truck Bushing Replacement: adım 12, 1 resimden 1.

    • Rotate the 1/2 inch wrench clockwise to tighten the pin.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

3 tane daha katılımcı ile

Richard

Üyelik tarihi: 04/25/24

205 İtibar

1 Kılavuz yazıldı

Rozetler: 3

Ekip

UC Davis, Team 3-1, Whithaus Spring 2024 UC Davis, Team 3-1, Whithaus Spring 2024 üyesi

UCD-WHITHAUS-S24S3G1

3 Üyeler

1 Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 3

Son 30 gün: 37

Her zaman: 66