Ana içeriğe geç

Giriş

This repair guide will show you how to replace the metal contact points within the battery compartment of the remote controller for the MerchSource the Black Series Boat Racers device.

Parçalar

Hiçbir parça belirtilmedi.

  1. Turn the remote controller over to the back. Turn the remote controller over to the back.
    • Turn the remote controller over to the back.

  2. Slide the battery cover off in the direction of the arrow on the cover.
    • Slide the battery cover off in the direction of the arrow on the cover.

  3. Remove the batteries (2 AA). Remove the batteries (2 AA).
    • Remove the batteries (2 AA).

  4. iPhone Pil Tamir Setleri

    Only $29.99

    Buy Now

    iPhone Pil Tamir Setleri

    Only $29.99

    Buy Now
  5. Using a Phillips #1 screwdriver, remove the four screws located in the four corners of the back of the remote controller.
    • Using a Phillips #1 screwdriver, remove the four screws located in the four corners of the back of the remote controller.

    • Screw length is 6 mm.

  6. Separate the two halves of the remote controller. Separate the two halves of the remote controller.
    • Separate the two halves of the remote controller.

  7. Lift the metal tab until it is straight and can move through the slot in the battery compartment. Lift the metal tab until it is straight and can move through the slot in the battery compartment.
    • Lift the metal tab until it is straight and can move through the slot in the battery compartment.

  8. Flip the remote controller to the external side and slide the metal connections in the battery compartment straight up. Slide the new connections straight down into the slot in the battery compartment, flip to the internal side, and bend the metal tab until it's parallel with the battery compartment.
    • Flip the remote controller to the external side and slide the metal connections in the battery compartment straight up.

    • Slide the new connections straight down into the slot in the battery compartment, flip to the internal side, and bend the metal tab until it's parallel with the battery compartment.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Monica Reece

Üyelik tarihi: 31-08-2018

651 İtibar

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 68