Ana içeriğe geç
Meta Quest 2 Facial Interface Replacement

Meta Quest 2 Facial Interface Replacement

Arthur Shi

Arthur Shi

En son July 18, 2024 tarihinde güncellendi

1 - 3 dakika
Çok kolay
Öne Çıkan Kılavuzlar

This guide shows how to remove and replace the facial interface (aka face padding, face cushion, or face cover) for the Meta Quest 2.

  1. Meta Quest 2 Facial Interface Replacement, Remove the facial interface: adım 1, 2 resimden 1. Meta Quest 2 Facial Interface Replacement, Remove the facial interface: adım 1, 2 resimden 2.
    • Grasp and pull on the nose section of the facial interface to unclip it from the headset.

  2. Meta Quest 2 Facial Interface Replacement: adım 2, 2 resimden 1. Meta Quest 2 Facial Interface Replacement: adım 2, 2 resimden 2.
    • Grasp and pull on the top section of the facial interface to unclip it from the headset.

  3. Meta Quest 2 Facial Interface Replacement: adım 3, 1 resimden 1.
    • Remove the facial interface.

    • During reassembly, align the facial interface to the headset and use your fingers to press along the perimeter to clip it back in.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

Arthur Shi

Üyelik tarihi: 01/03/18

282.700 İtibar

587 adet Kılavuz yazıldı

Ekip

iFixit iFixit üyesi

Staff

118 Üyeler

19.455 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 3

Son 7 gün: 43

Son 30 gün: 117

Her zaman: 1,826