Skip to main content

Giriş

*In order to access the camera, refer to steps 1 - 5 in the Microsoft Surface Pro Teardown Guide to remove the screen.

Teardown Guide

  1. Using a T5 Torx screwdriver, unscrew a total number of 23 screws located on the outside panel of the Surface Pro. Using a T5 Torx screwdriver, unscrew a total number of 23 screws located on the outside panel of the Surface Pro.
    • Using a T5 Torx screwdriver, unscrew a total number of 23 screws located on the outside panel of the Surface Pro.

  2. Use the plastic opening tool or fingers to pry out the front camera.
    • Use the plastic opening tool or fingers to pry out the front camera.

  3. Android Tamir Setleri

    Yeni bir ekran veya pil, bir tamir kiti kadar yakınında.

    Hemen Alışveriş Yapın

    Android Tamir Setleri

    Yeni bir ekran veya pil, bir tamir kiti kadar yakınında.

    Hemen Alışveriş Yapın
  4. Lift the outside panel from the Surface Pro.
    • Lift the outside panel from the Surface Pro.

  5. Use the plastic opening tool to pry out the back camera. Use the plastic opening tool to pry out the back camera.
    • Use the plastic opening tool to pry out the back camera.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Jonathan Choi

Üyelik tarihi: 09-10-2013

660 Reputation

4 adet Kılavuz yazıldı

Team

Cal Poly, Team 8-20, Regan Fall 2013 Cal Poly, Team 8-20, Regan Fall 2013 üyesi

CPSU-REGAN-F13S8G20

4 Üyeler

10 adet Kılavuz yazıldı

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 6

Past 30 Days: 17

All Time: 2,333