Ana içeriğe geç

Milwaukee 2704-20 Control Switch Replacement

Neye ihtiyacın var

  1. Milwaukee 2704-20 Control Switch Replacement, Outer Case: adım 1, 2 resimden 1. Milwaukee 2704-20 Control Switch Replacement, Outer Case: adım 1, 2 resimden 2.
    • Remove the battery from the drill.

  2. Milwaukee 2704-20 Control Switch Replacement: adım 2, 3 resimden 1. Milwaukee 2704-20 Control Switch Replacement: adım 2, 3 resimden 2. Milwaukee 2704-20 Control Switch Replacement: adım 2, 3 resimden 3.
    • Remove the indicated screws (M3 x 16mm Pan Hd. ST T-10 Screws) with screwdriver.

  3. Milwaukee 2704-20 Control Switch Replacement: adım 3, 3 resimden 1. Milwaukee 2704-20 Control Switch Replacement: adım 3, 3 resimden 2. Milwaukee 2704-20 Control Switch Replacement: adım 3, 3 resimden 3.
    • Gently lift the cover off the drill. Be careful not to force it or damage any of the internal components.

    • If the cover doesn't come off easily, check for any clips or latches that may be holding it in place. These can usually be released by pressing them with a small flathead screwdriver.

  4. Milwaukee 2704-20 Control Switch Replacement, Control Switch: adım 4, 3 resimden 1. Milwaukee 2704-20 Control Switch Replacement, Control Switch: adım 4, 3 resimden 2. Milwaukee 2704-20 Control Switch Replacement, Control Switch: adım 4, 3 resimden 3.
    • Remove the control switch.

    • It is not attached to anything and should slide out easily. Take note of orientation and be sure to replace it in the same position.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Unique Linnell

Üyelik tarihi: 03/13/23

423 İtibar

5 adet Kılavuz yazıldı

Ekip

UMass Dartmouth, Team 2-1, Petersen Spring 2023 UMass Dartmouth, Team 2-1, Petersen Spring 2023 üyesi

UMASSD-PETERSEN-S23S2G1

4 Üyeler

7 adet Kılavuz yazıldı

0Kılavuz Yorumları

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 10

Son 30 gün: 77

Her zaman: 464