Eşyalarını Tamir Et Topluluk Mağaza

Milwaukee Hex Impact Driver 2750-20 Driver Head Replacement

Giriş

The following repair guide shows how to remove and replace the Milwaukee Hex Impact Driver 2750-20 driver head in an easy and effective manner.

Neye ihtiyacın var

  1. Milwaukee Hex Impact Driver 2750-20 Driver Head Replacement, Outer Casing: adım 1, 1 resimden 1.

    • Remove the five T9 15.5 mm screws.

    • Remove the single T9 19.5mm screw.

    • Remove the two T9 37mm screws.

    Düzenle

  3. Milwaukee Hex Impact Driver 2750-20 Driver Head Replacement: adım 2, 1 resimden 1.

    • Remove the drill casing to expose the drill's interior parts.

    Düzenle

  4. Milwaukee Hex Impact Driver 2750-20 Driver Head Replacement, Driver Head: adım 3, 3 resimden 1. Milwaukee Hex Impact Driver 2750-20 Driver Head Replacement, Driver Head: adım 3, 3 resimden 2. Milwaukee Hex Impact Driver 2750-20 Driver Head Replacement, Driver Head: adım 3, 3 resimden 3.

    • Lift the driver head and motor assembly directly out of the outer casing.

    • Pull the driver head away from the motor assembly, separating the two.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 7

Her zaman: 571