Eşyalarını Tamir Et Topluluk Mağaza

Milwaukee Hex Impact Driver 2750-20 Chuck Drive Shaft Replacement

Giriş

The following repair guide shows how to remove and replace the chuck drive shaft in a Milwaukee Hex Impact Driver 2750-20.

Neye ihtiyacın var

  1. Milwaukee Hex Impact Driver 2750-20 Chuck Drive Shaft Replacement, Outer Casing: adım 1, 1 resimden 1.

    • Remove the five T9 15.5 mm screws.

    • Remove the single T9 19.5mm screw.

    • Remove the two T9 37mm screws.

    Düzenle

  2. Milwaukee Hex Impact Driver 2750-20 Chuck Drive Shaft Replacement: adım 2, 1 resimden 1.

    • Remove the drill casing to expose the drill's interior parts.

    Düzenle

  4. Milwaukee Hex Impact Driver 2750-20 Chuck Drive Shaft Replacement, Chuck Drive Shaft: adım 3, 3 resimden 1. Milwaukee Hex Impact Driver 2750-20 Chuck Drive Shaft Replacement, Chuck Drive Shaft: adım 3, 3 resimden 2. Milwaukee Hex Impact Driver 2750-20 Chuck Drive Shaft Replacement, Chuck Drive Shaft: adım 3, 3 resimden 3.

    • Pulling directly outward, remove the driver head from the motor assembly by picking it up out of the casing.

    Düzenle

  5. Milwaukee Hex Impact Driver 2750-20 Chuck Drive Shaft Replacement: adım 4, 1 resimden 1.

    • Remove the drive shaft assembly from the motor coils.

    • There will be resistance when removing the drive shaft as there is magnetism working against you.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 4

Son 30 gün: 13

Her zaman: 738