Eşyalarını Tamir Et Topluluk Mağaza

Milwaukee M12 2407-20 Outer Casing Replacement

Giriş

This guide will walk through the steps to remove the service housing set (outer casing) on the Milwaukee M12 2407-20.

Neye ihtiyacın var

  1. Milwaukee M12 2407-20 Outer Casing Replacement, Outer Casing: adım 1, 1 resimden 1.

    • Remove each of the seven 14mm Pan Hd. T-10 ST screws on one side of the housing assembly using the T10 screwdriver.

    Düzenle

  3. Milwaukee M12 2407-20 Outer Casing Replacement: adım 2, 1 resimden 1.

    • Remove metal clip located at the base of the drill, where the battery is to be inserted.

    • You may need to use a spudger if the clip is too difficult to remove with your fingers.

    Düzenle
Bitiş Çizgisi

2 farklı kişi bu kılavuzu tamamladı.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 9

Son 30 gün: 32

Her zaman: 3,204