Eşyalarını Tamir Et Topluluk Mağaza

Milwaukee M12 2407-20 Speed Selector Lever Replacement

Giriş

This guide will walk through the steps to replace the speed selector lever on the Milwaukee M12 2407-20.

Neye ihtiyacın var

  1. Milwaukee M12 2407-20 Speed Selector Lever Replacement, Outer Casing: adım 1, 1 resimden 1.

    • Remove each of the seven 14mm Pan Hd. T-10 ST screws on one side of the housing assembly using the T10 screwdriver.

    Düzenle

  2. Milwaukee M12 2407-20 Speed Selector Lever Replacement: adım 2, 1 resimden 1.

    • Remove metal clip located at the base of the drill, where the battery is to be inserted.

    • You may need to use a spudger if the clip is too difficult to remove with your fingers.

    Düzenle

  4. Milwaukee M12 2407-20 Speed Selector Lever Replacement, Speed Selector Lever: adım 3, 3 resimden 1. Milwaukee M12 2407-20 Speed Selector Lever Replacement, Speed Selector Lever: adım 3, 3 resimden 2. Milwaukee M12 2407-20 Speed Selector Lever Replacement, Speed Selector Lever: adım 3, 3 resimden 3.

    • Remove the unit from the housing assembly and set the housing assembly aside.

    Düzenle

  5. Milwaukee M12 2407-20 Speed Selector Lever Replacement: adım 4, 1 resimden 1.

    • Use a spudger to pry the broken speed selector lever off the assembly.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 3

Son 30 gün: 23

Her zaman: 1,808