Eşyalarını Tamir Et Topluluk Mağaza

Milwaukee Reciprocating Saw 6538-21-B36B (2010) Gearcase Insulator Replacement

Giriş

Use this guide to replace a damaged gearcase insulator on a Milwaukee Reciprocating Saw 6538-21-B36B (2010).

The gearcase insulator is a component that protects the gear case in power tools. It helps prevent damage to the gear case by providing a layer of insulation and cushioning if damaged use this guide if it needs to be repaired.

  1. Milwaukee Reciprocating Saw 6538-21-B36B (2010) Gearcase Insulator Replacement, Gearcase Insulator: adım 1, 2 resimden 1. Milwaukee Reciprocating Saw 6538-21-B36B (2010) Gearcase Insulator Replacement, Gearcase Insulator: adım 1, 2 resimden 2.

    • Pull up on the shoe release lever until it's perpendicular to the gearcase insulator.

    Düzenle

  3. Milwaukee Reciprocating Saw 6538-21-B36B (2010) Gearcase Insulator Replacement: adım 2, 1 resimden 1.

    • Pull the shoe assembly out from the saw.

    Düzenle

  4. Milwaukee Reciprocating Saw 6538-21-B36B (2010) Gearcase Insulator Replacement: adım 3, 2 resimden 1. Milwaukee Reciprocating Saw 6538-21-B36B (2010) Gearcase Insulator Replacement: adım 3, 2 resimden 2.

    • Remove the gearcase insulator by folding over the rubber, dislodging the insulator from the red shift lever, and pulling it off.

    • Using the screwdriver to help lift the rubber over the lever and folding it over may be helpful.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 15

Her zaman: 41