Ana içeriğe geç

Minolta Dimage Xt Capture Button Replacement

Neye ihtiyacın var

  1. Minolta Dimage Xt Capture Button Replacement, Casing: adım 1, 3 resimden 1. Minolta Dimage Xt Capture Button Replacement, Casing: adım 1, 3 resimden 2. Minolta Dimage Xt Capture Button Replacement, Casing: adım 1, 3 resimden 3.
    • Locate and remove the silver screws on each side of the camera.

    • Use the Phillips #00 Screwdriver to unscrew all 2.0mm (4 instances) and 4.0mm (2 instances) screws.

  2. Minolta Dimage Xt Capture Button Replacement: adım 2, 3 resimden 1. Minolta Dimage Xt Capture Button Replacement: adım 2, 3 resimden 2. Minolta Dimage Xt Capture Button Replacement: adım 2, 3 resimden 3.
    • Then, carefully pry apart the front and back outer casing away from the internal components.

    • Be aware of the ribbon wire that will disconnect when the casing is detached.

  3. Minolta Dimage Xt Capture Button Replacement, Capture Button: adım 3, 1 resimden 1.
    Bu adımda kullanılan alet:
    Tweezers
    $4.99
    Satın Al
    • Choosing the front half of the casing, locate the capture button on the top.

    • Using tweezers, apply pressure to the two black hooks (circled in red) while holding the button down from the outside of the case.

  4. Minolta Dimage Xt Capture Button Replacement: adım 4, 1 resimden 1.
    • The button will spring free. The capture device consists of the plastic button and a small metal spring.

    • The button can be reassembled by using the tweezers to place the spring rectangle-side down on the button and snapping the button back into place.

Sonuç

Reassemble the casing by reversing steps 1 and 2.

Megan Milam

Üyelik tarihi: 03/11/13

28 İtibar

5 adet Kılavuz yazıldı

Ekip

Clemson, Team 12-4, Benson Spring 2013 Clemson, Team 12-4, Benson Spring 2013 üyesi

CLEM-BENSON-S13S12G4

3 Üyeler

14 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 17

Her zaman: 459