Giriş
If the camera seems to have lost power, it is necessary to replace the main battery. This can be accomplished in a couple simple steps.
Neye ihtiyacın var
-
-
Use the edge of a coin to twist open the battery compartment on the bottom of the camera. (Twist counterclockwise)
-
-
-
-
When the compartment opens, pull the AA battery out of its slot.
My used one had a pair of CR2 batteries in it, not a AA battery.
Please revisit the battery type.
That’s right they are CR2 not AA!
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
İptal et: Bu kılavuzu tamamlamadım.
Bir başkası bu kılavuzu tamamladı.
1Rehber Yorum
Minolta STsi MAXXUM will not turn on with new AA batt installed. HELP!!
My used one had a pair of CR2 batteries in it, not a AA battery.
Please revisit the battery type.
W. S. SCOTT BOYD - Yanıt