Eşyalarını Tamir Et Topluluğa Katılın Mağaza

Minolta QTsi Maxxum Lens Replacement

Giriş

Replace the back piece of glass so that your pictures will be clear of scratches and cracks.

What you need

  1. Minolta QTsi Maxxum Lens Replacement, Lens: adım 1, 2 resimden 1. Minolta QTsi Maxxum Lens Replacement, Lens: adım 1, 2 resimden 2.

    • The lens release button is located on the right front side of the camera.

    • Remove the lens from the camera by pushing the lens release button.

    Düzenle

  3. Minolta QTsi Maxxum Lens Replacement: adım 2, 1 resimden 1.

    • The detached module has multiple screws that must be removed in order to reach the lens.

    • Once detached, remove the (4) black Phillips #00 5mm screws from the outer rim of the module.

    • Next, remove the (2) remaining black Phillips #00 5mm screws.

    Düzenle

  4. Minolta QTsi Maxxum Lens Replacement: adım 3, 2 resimden 1. Minolta QTsi Maxxum Lens Replacement: adım 3, 2 resimden 2.

    • Once all screws have been removed, take the back piece off of the lens and replace it.

    • This piece should come off easily without using any tools.

    • There is film underneath the last 2 screws that are removed so be careful when taking it out because it could rip.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

2 tane daha katılımcı ile

Jordan Ellery

Üyelik tarihi: 10/10/16

367 İtibar

3 adet Kılavuz yazıldı

Badges: 6

+3 tane daha rozet

Team

Sam Houston State, Team 12-4, Blackburne Fall 2016 Sam Houston State, Team 12-4, Blackburne Fall 2016 üyesi

SHSU-BLACKBURNE-F16S12G4

4 Üyeler

5 adet Kılavuz yazıldı

0 Comments

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 5

Son 30 gün: 18

Her zaman: 446