Ana içeriğe geç

Giriş

To replace the screen of the Mio ALPHA 2, firstly you would need a proper repair toolkit. This is a relatively easy replacement as you would only need a Philip screwdriver with a PH0 head and tweezers. Be careful not to apply too much force or tug the cords inside.

This guide would be helpful if you're trying to replace the screen of your Mio ALPHA 2.

  1. Remove the four 6.7mm JIS #00 screws from the back cover. Remove the four 6.7mm JIS #00 screws from the back cover.
    • Remove the four 6.7mm JIS #00 screws from the back cover.

  2. Pull off the back cover of the watch Use a pair of tweezers to flip up the retaining flap on the  ribbon cable ZIF socket. Remove the ribbon cable from its socket.
    • Pull off the back cover of the watch

    • Use a pair of tweezers to flip up the retaining flap on the ribbon cable ZIF socket.

    • Remove the ribbon cable from its socket.

  3. Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now

    Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now
  4. Remove the four 3.8mm JIS #00 screws from the motherboard. Remove the motherboard with tweezers Remove the motherboard with tweezers
    • Remove the four 3.8mm JIS #00 screws from the motherboard.

    • Remove the motherboard with tweezers

  5. Remove the screen using tweezers.
    • Remove the screen using tweezers.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Wong Jun Hua

Üyelik tarihi: 21-05-2018

169 İtibar

2 adet Kılavuz yazıldı

Takım

IUPUI, Team S1-G3, Harley Spring 2018 IUPUI, Team S1-G3, Harley Spring 2018 üyesi

IUPUI-HARLEY-S18S1G3

6 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 2

Son 30 Gün: 8

Her zaman: 139