Ana içeriğe geç

Bu kılavuzda güncel değişiklikler var. En son onaylanmamış sürüme geçin.

Mk Diamond Wet Saws MK660 2010 Blade Replacement

Neye ihtiyacın var

  1. Mk Diamond Wet Saws MK660 2010 Blade Replacement, Blade Cover: adım 1, 3 resimden 1. Mk Diamond Wet Saws MK660 2010 Blade Replacement, Blade Cover: adım 1, 3 resimden 2. Mk Diamond Wet Saws MK660 2010 Blade Replacement, Blade Cover: adım 1, 3 resimden 3.
    • Before you begin, make sure to power off and unplug the device from the outlet.

    • If the clear water pump hose is connected, remove it now.

    • Loosen the plastic knob holding the saw's cutting head in place.

    • Lower the cutting head while keeping it steady.

  2. Mk Diamond Wet Saws MK660 2010 Blade Replacement: adım 2, 2 resimden 1. Mk Diamond Wet Saws MK660 2010 Blade Replacement: adım 2, 2 resimden 2.
    • Unscrew the knob.

    • Remove it from the cutting head.

  3. Mk Diamond Wet Saws MK660 2010 Blade Replacement: adım 3, 2 resimden 1. Mk Diamond Wet Saws MK660 2010 Blade Replacement: adım 3, 2 resimden 2.
    • Loosen the plastic knob holding the blade cover in place.

  4. Mk Diamond Wet Saws MK660 2010 Blade Replacement: adım 4, 3 resimden 1. Mk Diamond Wet Saws MK660 2010 Blade Replacement: adım 4, 3 resimden 2. Mk Diamond Wet Saws MK660 2010 Blade Replacement: adım 4, 3 resimden 3.
    • Loosen the wing nut on the blade cover pivot shaft.

    • Remove the wing nut and accompanying washer.

  5. Mk Diamond Wet Saws MK660 2010 Blade Replacement: adım 5, 2 resimden 1. Mk Diamond Wet Saws MK660 2010 Blade Replacement: adım 5, 2 resimden 2.
    • Pivot the blade cover up and pull it off the shaft.

  6. Mk Diamond Wet Saws MK660 2010 Blade Replacement, Blade: adım 6, 3 resimden 1. Mk Diamond Wet Saws MK660 2010 Blade Replacement, Blade: adım 6, 3 resimden 2. Mk Diamond Wet Saws MK660 2010 Blade Replacement, Blade: adım 6, 3 resimden 3.
    • Insert the provided spanner wrench into one of the four tightening holes on the inner flange behind the blade.

    • Use the the provided nut wrench to loosen the hex nut while providing counterforce with the spanner wrench.

  7. Mk Diamond Wet Saws MK660 2010 Blade Replacement: adım 7, 2 resimden 1. Mk Diamond Wet Saws MK660 2010 Blade Replacement: adım 7, 2 resimden 2.
    • Remove the hex nut.

    • Remove the outer flange.

  8. Mk Diamond Wet Saws MK660 2010 Blade Replacement: adım 8, 2 resimden 1. Mk Diamond Wet Saws MK660 2010 Blade Replacement: adım 8, 2 resimden 2.
    • Remove the cutting blade.

    • The blade can be sharp, so handle with care.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Carsten Frauenheim

Üyelik tarihi: 03/10/20

110.900 İtibar

338 adet Kılavuz yazıldı

Ekip

iFixit iFixit üyesi

Staff

136 Üyeler

16.573 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 14

Her zaman: 797