Ana içeriğe geç

Montgomery Ward GEN-39500 Antenna Replacement

Neye ihtiyacın var

  1. Montgomery Ward GEN-39500 Antenna Replacement, Back Cover: adım 1, 1 resimden 1.
    • Remove the nine 35 mm Phillips screws securing the back cover of the case.

  2. Montgomery Ward GEN-39500 Antenna Replacement: adım 2, 1 resimden 1.
    • Carefully remove the back cover.

    • Soldered wires connect electronics on the back cover to the internal electronics. Be careful not to break any connections.

  3. Montgomery Ward GEN-39500 Antenna Replacement: adım 3, 2 resimden 1. Montgomery Ward GEN-39500 Antenna Replacement: adım 3, 2 resimden 2.
    • Unplug the black and yellow wires connecting the power supply unit to the rest of the electronics:

    • This is not necessarily required. This step is to allow the back cover more movement as you work on the inside of the unit.

  4. Montgomery Ward GEN-39500 Antenna Replacement, Antenna: adım 4, 2 resimden 1. Montgomery Ward GEN-39500 Antenna Replacement, Antenna: adım 4, 2 resimden 2.
    • Unsolder the wire connecting the antenna to the radio.

  5. Montgomery Ward GEN-39500 Antenna Replacement: adım 5, 1 resimden 1.
    • Tilt the back cover up and remove the two 7.5 mm Phillips screws holding the antenna in place.

  6. Montgomery Ward GEN-39500 Antenna Replacement: adım 6, 1 resimden 1.
    • Remove the antenna.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Dustin Platt

Üyelik tarihi: 04/01/15

931 İtibar

6 adet Kılavuz yazıldı

Ekip

Cal Poly, Team 12-5, Lancaster Spring 2015 Cal Poly, Team 12-5, Lancaster Spring 2015 üyesi

CPSU-LANCASTER-S15S12G5

4 Üyeler

13 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 122