Eşyalarını Tamir Et Topluluk Mağaza

Moosoo XL-618A Floor Brush Replacement

Giriş

The floor brush is the cylindrical brush on the bottom of the Moosoo XL-618A vacuum. The floor brush is what picks up the dirt and debris on the floor when vacuuming. It also keeps the air floor close to the ground so not dust gets further up in the air. Here is a guide to replace the floor brush.

Neye ihtiyacın var

  1. Moosoo XL-618A Floor Brush Replacement, Floor Brush: adım 1, 1 resimden 1.

    • Remove the eight 11 mm screws on the bottom of the vacuum with the Phillips #1 screwdriver.

    Düzenle

  2. Moosoo XL-618A Floor Brush Replacement: adım 2, 2 resimden 1. Moosoo XL-618A Floor Brush Replacement: adım 2, 2 resimden 2.

    • Pull the two hard plastic covers off of the floor brush piece.

    Düzenle

  4. Moosoo XL-618A Floor Brush Replacement: adım 3, 2 resimden 1. Moosoo XL-618A Floor Brush Replacement: adım 3, 2 resimden 2.

    • Pull the motor and floor brush attachments out of their slot.

    Düzenle

  5. Moosoo XL-618A Floor Brush Replacement: adım 4, 1 resimden 1.

    • Pull the floor brush off of the motor.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

4 tane daha katılımcı ile

Siella Wilcock

Üyelik tarihi: 09/20/23

112 İtibar

1 Kılavuz yazıldı

Rozetler: 5

+2 tane daha rozet

Ekip

Utah Tech University, Team 1-1, McMurrin Fall 2023 Utah Tech University, Team 1-1, McMurrin Fall 2023 üyesi

UTAHTECH-MCMURRIN-F23S1G1

4 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 5

Son 30 gün: 21

Her zaman: 140