Eşyalarını Tamir Et Topluluk Mağaza

Motex E101 Label Tape Spool Replacement

Giriş

As you may already know, the Motex E101 is a popular label maker that is commonly used for home and office labeling needs. While the device is durable and reliable, replacing the label tape spool can be a tricky task, if the current spool is not yet empty. However, with the right tricks, you can easily replace the label tape spool of your Motex E101 label maker and continue creating labels without any interruption.

Neye ihtiyacın var

  1. Motex E101 Label Tape Spool Replacement, Unlock the wheel: adım 1, 2 resimden 1. Motex E101 Label Tape Spool Replacement, Unlock the wheel: adım 1, 2 resimden 2.

    • Press the release button on the back of the device.

    Düzenle

  2. Motex E101 Label Tape Spool Replacement, Pull the pin: adım 2, 2 resimden 1. Motex E101 Label Tape Spool Replacement, Pull the pin: adım 2, 2 resimden 2.

    • Pull the pin securing the wheel.

    Düzenle

  4. Motex E101 Label Tape Spool Replacement, Remove the daisy wheel: adım 3, 2 resimden 1. Motex E101 Label Tape Spool Replacement, Remove the daisy wheel: adım 3, 2 resimden 2.

    • Remove the daisy wheel.

    Düzenle

  5. Motex E101 Label Tape Spool Replacement, Remove the old tape: adım 4, 1 resimden 1.

    • Pull the old tape out of the mechanism.

    • You can load the new tape the standard way after reassembling the device.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

1 tane daha katılımcı ile

Sebastian

Üyelik tarihi: 08/19/18

20.947 İtibar

60 adet Kılavuz yazıldı

Rozetler: 45

+42 tane daha rozet

Ekip

German Translators German Translators üyesi

Community

27 Üyeler

757 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 5

Her zaman: 125